01527 544 033

Model S1PA Solvent Sprayer


Polyamid (type of Nylon) pump, giving excellent resistance to solvents
Seals made from Viton, the best overall resistant seal material
Container pressurised by pump action, making it easy to use
 Adjustable nozzle, giving a variable spray pattern.


1 litre total capacity
0.75 litre working capacity
Dimensions (approximately): height: 278mm, width: 190mm, container diameter: 98mm
 Weight (approximately): 400g.


Hydrocarbon based solvents
De-greaser products


Stainless steel

We can advise as to whether our finger sprayers are suitable for use with general chemical components, but recommend you carry out trials to ensure compatibility with your own formulation.


Why do I need a special sprayer for Hydrocarbon Solvents?

Hydrocarbon Solvents will make plastics swell – because they are both derived from crude oil and have in part, the same molecules. Standard sprayers have plastic pumps but our S1Z solvent sprayer has stainless steel pump and Viton seals which are suitable with these solvents.

What are the best seals for pressure sprayers?

This depends on what chemicals you are spraying. Flourocarbon (trade name Viton) is the best overall resistant material to the widest range of chemicals. However, it is more expensive than other materials and may not be necessary. Nitrile (or Buna N) is lower in cost and is suitable for many water based chemicals. Ask our staff for more information about your chemicals.

What is the difference between actual capacity and working capacity?

Actual capacity is the ‘total’ capacity of the container. However, the pressure sprayer needs an amount of air to compress, to force the chemical out. The working capacity is the maximum amount of product which can be filled to operate the sprayer.

How can I prolong the life of my sprayer?

To get the best results from your sprayers we recommend they are completely emptied and rinsed through after each use.